Remdriven ink Audiotechnica AT-95 pickup (bra)
Inbyggt Riaa/Phono-steg för MM-pickuper, går gå förbi om man har exterrnt Riaa
Grym finish och fantastisk arm för prisklassen
Lagerförs i svart
Analog Turntable
A new, high-performance standard for belt-drive analog turntables
The TN-3B is a stylish, sleek-looking belt-driven turntable with a built-in MM-type PHONO EQ amplifier and USB digital output.
It employs a new tonearm with knife-edge, pivot-point bearings, co-developed with SAEC, the high-end tonearm manufacturer, for superlative stability and resolution.
The belt-drive mechanism, meanwhile, helps mitigate any unwanted cogging effects (ie fine pulsing) from the operation of the motor, to ensure a precise and smooth platter rotation.
The TN-3B also employs a high-precision NJM8080 op-amp in its in-built Phono EQ amplifier, allowing the user to enjoy the sound of their vinyl records with low distortion and in high quality. In addition, a built-in Analog-to-Digital converter and USB port allow users to digitise their vinyl libraries on their PC/Mac.
The TN-3B delivers a natural and well-balanced sound quality and is quick and easy to set up and start enjoying. We believe it sets a new standard that will satisfy the needs of both audiophiles and ardent record collectors.
Features at-a-glance
- 2-speed, belt-drive turntable offering 33-1/3 and 45 rpm speeds
- Knife-edge, pivot-point tonearm designed by high-end tonearm manufacturer SAEC
- Static-balanced, S-shaped tone-arm with pre-installed audio-technica AT-VM95E MM cartridge
- Die-cast aluminum platter
- USB digital output for digital archiving on PC/Mac
- PHONO/LINE analog outputs (switchable)
- Built-in PHONO EQ amplifier, compatible with MM-type cartridges
- Hi-fi grade NJM8080 op-amp used in PHONO EQ stage
Specifications
| Turntable section |
|
| Type |
Belt-drive (External drive) |
| Motor |
DC Motor |
| Rotation Speeds |
33-⅓ rpm, 45 rpm |
| Wow-and-Flutters |
0.1% or less |
| S/N Ratio |
67dB (A-weighted, 20kHz LPF) |
| Turntable (Platter) |
|
| Material |
Aluminum Die-cast |
| Diameter |
30cm |
| Tone-arm section |
|
| Type |
S-shape, Static-balanced |
| Effective Length |
223mm |
| Needle Pressure Range |
0g to 5.0g |
| Compatible Cartridge Weight |
3.0g to 12.0g
14g to 23g (including Head-shell) |
| Cartridge section |
|
| Type |
MM-type |
| Output Voltage |
4.0mV (1kHz, 5cm/sec.) |
| Needle Pressure |
1.8 to 2.2g (2.0g recommended) |
| Weight |
6.1g |
| Head-shell weight |
11g (including screws, nuts, and wires) |
| Compatible Stylus |
AT-VMN95E * Average stylus life: approx. 300 hours.
|
| Analog Outputs |
|
| Connector |
RCA Pin jack × 1 pair (Gold-plated) |
| Output Voltage |
|
| PHONO |
4.0mV (1kHz) |
| LINE |
224mV (–13dBV) |
| USB Output |
|
| Connector |
USB B-type (DC 5V 100mA USB Bus power required) |
| Audio Format |
PCM, 8k/11.025k/16k/22.5k/32k/44.1k/48kHz, 16bit |
| Operating Power |
AC 100 to 240V, 50/60Hz |
| Power Consumption |
1.5W |
| Standby Power |
0.5W |
| Overall Dimensions (W×H×D) |
420 × 117 × 356 mm /
16.5″ × 4.6″ × 14.0″ (including protrusions) |
| Weight |
approx. 5.0kg / 11.0 lbs. |
| Included Accessories |
Felt Mat, EP Adapter, Counter Weight, Head-shell (AT-VM95E installed), Platter, Dust Cover, Hinges × 2, RCA Audio cable with GND terminal, AC Adapter (GPE053A-V120050), Owner’s Manual (including Warranty Card) |
...
| Turntable section |
|
| Type |
Belt-drive (External drive) |
| Motor |
DC Motor |
| Rotation Speeds |
33-⅓ rpm, 45 rpm |
| Wow-and-Flutters |
0.1% or less |
| S/N Ratio |
67dB (A-weighted, 20kHz LPF) |
| Turntable (Platter) |
|
| Material |
Aluminum Die-cast |
| Diameter |
30cm |
| Tone-arm section |
|
| Type |
S-shape, Static-balanced |
| Effective Length |
223mm |
| Needle Pressure Range |
0g to 5.0g |
| Compatible Cartridge Weight |
3.0g to 12.0g
14g to 23g (including Head-shell) |
| Cartridge section |
|
| Type |
MM-type |
| Output Voltage |
4.0mV (1kHz, 5cm/sec.) |
| Needle Pressure |
1.8 to 2.2g (2.0g recommended) |
| Weight |
6.1g |
| Head-shell weight |
11g (including screws, nuts, and wires) |
| Compatible Stylus |
AT-VMN95E * Average stylus life: approx. 300 hours.
|
| Analog Outputs |
|
| Connector |
RCA Pin jack × 1 pair (Gold-plated) |
| Output Voltage |
|
| PHONO |
4.0mV (1kHz) |
| LINE |
224mV (–13dBV) |
| Operating Power |
AC 100 to 240V, 50/60Hz |
| Power Consumption |
1.5W |
| Standby Power |
0.5W |
| Overall Dimensions (W×H×D) |
420 × 117 × 356 mm /
16.5" × 4.6" × 14.0" (including protrusions) |
| Weight |
approx. 5.0kg / 11.0 lbs. |
| Included Accessories |
Felt Mat, EP Adapter, Counter Weight, Head-shell (AT-VM95E installed), Platter, Dust Cover, Hinges × 2, RCA Audio cable with GND terminal, AC Adapter (GPE053A-V120050), Owner's Manual (including Warranty Card) |
