An ultra-compact stereo power amplifier, powered by Hypex Ncore technology,
designed to enable Bi-amping, or use in BTL (Bridge Tied Load/Bridged) mode
Spec description
| Amplifier section |
|
| Maximum output power |
|
| Stereo, Bi-amp modes |
130W + 130W (4Ω, 1kHz, JEITA)
90W + 90W (8Ω, 1kHz, JEITA) |
| BTL (Bridge) mode |
250W (8Ω, 1kHz, JEITA) |
| Rate output over |
|
| Stereo, Bi-amp modes |
115W + 115W (4Ω, 1kHz, THD 0.8%)
70W + 70W (8Ω, 1kHz, THD 0.8%) |
| BTL (Bridge) mode |
220W (8Ω, 1kHz, THD 0.8%) |
| Total harmonic distortion |
0.0015% (8Ω, 1kHz, 12.5W, JEITA) |
| Signal-to-Noise ratio |
113dB (8Ω, 1kHz, IHF-A) |
| Frequency response |
10Hz to 50,000Hz (+0dB, –5dB, 8Ω, 1W, JEITA) |
| Dumping factor |
370 or higher, JEITA (20Hz to 20kHz, Output impedance: 22mΩ, 8Ω loaded) |
| Input section |
|
| LINE IN (Balanced) |
|
| Connector |
XLR (2: HOT) × 1 pair |
| Input sensitivity |
1.3V (Output 8Ω, THD 1%) |
| Input impedance |
10kΩ or higher |
| LINE IN (Unbalance) |
|
| Connector |
RCA Pin (gold-plated) × 1 pair |
| Input sensitivity |
0.66V (Output 8Ω, THD 1%) |
| Input impedance |
10kΩ or higher |
| Speaker outputs |
|
| Connector |
Screw type × 1 set (gold-plated, AWG8 and Banana-plug compatible) |
| Compatible speaker impedance |
|
| Stereo, Bi-amp modes |
4Ω to 16Ω |
| BTL (Bridge) mode |
8Ω to 16Ω |
| Power |
| |
AC120V, 60Hz |
| |
AC220 - 240V, 50/60Hz |
| Power consumption |
106W |
| Standby power |
0.1W or less (at Auto power-saving mode) |
| Overall dimensions |
290 × 84.5 × 271 mm / 11.4" × 3.3" × 10.7" (W × H × D) |
| Weight |
4.4kg / 9.7 lbs. |
| Included accessories |
Power code, Owner's manual (incl. Warranty card) |
