Speaker output Rated output 100W + 100W (8Ω)
170W + 170W (4Ω)
Total harmonic distortion
(1kHz, 8Ω) 0.008% (100W)
(+0/-3.0 dB at 1W output) 10Hz – 100kHz
S/N ratio (IHF-A) 110dB
Damping factor 370
Minimum compatible impedance 4Ω
Speaker output connectors 2 pairs (L/R) (screw type)
Input impedance XLR, RCA 10kΩ
PHONO (MM) 47kΩ
PHONO (MC) 100Ω
EXT. PRE IN 47kΩ
Output impedance RCA 100Ω
PRE OUT S/N ratio (at 1V output)
XLR, RCA input 109dB
PHONO (MM) input 93dB
PHONO (MC) input 75dB
Gain Preamplifier 24.5dB (when VOLUME at maximum)
Power amplifier 29dB
Tone controls BASS tone curve ±12dB (63Hz)
TREBLE tone curve ±12dB (14kHz)
General Power supply AC 230V 50Hz
AC 120V 60Hz
AC 220V 60Hz
(W x H x D) 445 x 191 x 468mm
(17 5/8″ x 7 5/8″ x 18 1/2″)
Weight 27.2kg (60 lb)
Included accessories Power cord x 1
Remote control (RC-1301) x 1
Batteries (AAA) x 2
Felt pads x4
Owner’s manual x 1
Warranty card x 1
MER INFORMATION HÄR
A Fully Balanced Preamplifier
Virtually impervious to noise, the preamplifier’s fully balanced configuration delivers pure and powerful signal amplification at ultra-low impedance.
Dual Monaural by Design
Most clearly reflecting Grandioso thinking, the F-07’s dual monaural configuration maintains complete left and right channel independence through all stages, from the preamplifier to the power amplifier’s final stage. Outstanding circuit construction also yields excellent channel separation and sound quality to transcend the class.
Playing a significant role in the F-07’s balanced dual monaural configuration is Esoteric’s proprietary Quad Volume Control System (QVCS), which incorporates a total of four precision switched resistor ladder networks operating in unison to independently and electronically control the left and right channels and their positive and negative phases.
This system helps maintain superb audio clarity, excellent channel separation and highly accurate phase characteristics.
Further, by eliminating all volume control wiring on the audio board, the resulting shorter signal path minimizes deterioration of sound quality while realizing exceptionally low distortion.
Ultra-Low-Noise Logic Control
As a countermeasure against noise, control board is housed in the front panel and electronically isolated from the main preamplifier board.
High-Precision Ball Bearing Control Knobs
Employing the same high-precision bearing mechanisms used in our Grandioso components, the F-07’s volume control knob and selector switches offer exceptionally smooth operation with an analog feel free of mechanical play. Sparing no cost, all panel knobs have also been custom-machined from solid aluminum.
Dual Mono Phonostage Preamp
The dual mono phono equalizer (MM/MC) features independent left and right channel power supplies and independent circuits
High-Quality Headphone Amplifier
The F-07’s powerful headphone amp delivers ample output to effectively drive high-impedance headphones.
2-Band (Treble/Bass) Tone Control
Consisting of four circuits (L/R, –/+) for each band, the system’s balanced dual monaural configuration enables the user to adjust tone settings free of any concerns about deterioration of sound quality. Shifting the variable bands more toward the high and low frequency ranges (14kHz/63Hz) permits fine tone adjustment without adversely affecting the original source signal.
Fully electronic control also permits fine adjustment of up to ±12dB in 0.5dB steps.
Balanced Power Amplifier Input Stage
With its balanced front stage, the power amplification section’s clean amplification and low impedance further enhance the dynamic range.
Large-Capacity Custom Power Transformer – The Nucleus of the Finest Power Amplifiers
The power supply features a large-core 633VA custom EI power transformer and 40,000µF block capacitors for each channel in its dual monaural configuration. Large-gauge cable used in all power connections helps minimize impedance to further ensure that every musical dynamic is faithfully reproduced by this outstanding power section.
Low Impedance Output Stage Design
The speaker output section employs eight 1mm-thick high-purity OFC bus bars and MOSFET switching with no mechanical contacts. Coils have also been eliminated from the output stage to minimize impedance and enhance drive capability.
Powerful Bipolar Transistors Deliver 30 Amperes of Instantaneous Peak Output
Large bipolar transistors deliver an outstanding continuous current capacity of 15A, and 30A of instantaneous peak power to ensure accurate reproduction of the most delicate tones.
[accordion-item title=”3-Stage Darlington Circuit with 2 Parallel Push-Pull Configuration + LIDSC”]
The F-07’s amplifier modules inherit the true spirit of our flagship Grandioso line with a three-stage Darlington configuration that utilizes two parallel push-pull sections.
Proprietary LIDSC* circuitry reduces the drive section’s second stage to final stage output impedance, achieving loudspeaker drive capability closely rivals to that of our separate amplifiers.
* LIDSC: Low Impedance Drive Stage Coupling
3D Optimized Chassis Construction
The F-07’s robust 3D Optimized Chassis construction gives each circuit block its own dedicated compartment.
Interference between circuits is effectively minimized while achieving the shortest possible cable routing. Chassis exteriors are formed of thick aluminum panels manufactured with the same uncompromising design philosophy imbued in Esoteric’s separate amplifiers.
As a result, their heavy-duty construction tips the scales at a total weight of 27.2kg, exceptional among integrated models.
The steel insulators supporting the unit at four points further exemplify the rigorous countermeasures taken to minimize the effects of vibration.
Designed for System Upgrades
The preamplifier and power amplifier sections of the F Series boast the same degree of refinement as Esoteric’s separates, and can both be used as standalone devices, or even disabled if not in use. The PRE-out employs a powerful buffer amplifier.
System upgrades can also be performed with no compromises in quality, and an optional board slot facilitates the installation of an optional board, such as OP-DAC1 D/A Converter Board or OP-ESLA1 ES-Link Analog Input Board.
Betalning och säkerhet
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.